Difference between revisions of "C457 System Assembly Instructions"
(Created page with "=Bill of Materials= =Raspberry Pi B+ Setup= # Consult [https://www.raspberrypi.org/help/ Raspberry Pi Help] to setup the Raspberry Pi. Use the Raspbian with Desktop download....") |
(→Raspberry Pi B+ Setup) |
||
| Line 8: | Line 8: | ||
## Move into folder: cd src | ## Move into folder: cd src | ||
## Clone the required repos: | ## Clone the required repos: | ||
| − | ##*Franklin: git clone https://github.com/mtu-most/franklin.git | + | ##*Franklin: <pre>git clone https://github.com/mtu-most/franklin.git</pre> |
| − | ##*python-fhs: git clone https://github.com/wijnen/python-fhs.git | + | ##*python-fhs: <pre>git clone https://github.com/wijnen/python-fhs.git</pre> |
| − | ##*python-network: git clone https://github.com/wijnen/python-network.git | + | ##*python-network: <pre>git clone https://github.com/wijnen/python-network.git</pre> |
| − | ##*python-websocketd: git clone https://github.com/wijnen/python-websocketd.git | + | ##*python-websocketd: <pre>git clone https://github.com/wijnen/python-websocketd.git</pre> |
| − | |||
=Arduino Uno + CNC Shield= | =Arduino Uno + CNC Shield= | ||
=Stage= | =Stage= | ||
Latest revision as of 15:02, 21 September 2019
Bill of Materials
Raspberry Pi B+ Setup
- Consult Raspberry Pi Help to setup the Raspberry Pi. Use the Raspbian with Desktop download. It is sufficient to power the Raspberry Pi with a USB cable attached to a computer for setting it up, though expect to see low power warnings.
- Once the Pi is running, install Franklin firmware on the Pi:
- Open a terminal.
- Create a new src folder: mkdir src
- Move into folder: cd src
- Clone the required repos:
- Franklin:
git clone https://github.com/mtu-most/franklin.git
- python-fhs:
git clone https://github.com/wijnen/python-fhs.git
- python-network:
git clone https://github.com/wijnen/python-network.git
- python-websocketd:
git clone https://github.com/wijnen/python-websocketd.git
- Franklin:
