C457 System Assembly Instructions

From MDOT_MTU

Revision as of 15:01, 21 September 2019 by Gcanzalo (talk | contribs) (Created page with "=Bill of Materials= =Raspberry Pi B+ Setup= # Consult [https://www.raspberrypi.org/help/ Raspberry Pi Help] to setup the Raspberry Pi. Use the Raspbian with Desktop download....")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Contents

1 Bill of Materials
2 Raspberry Pi B+ Setup
3 Arduino Uno + CNC Shield
4 Stage

Bill of Materials

Raspberry Pi B+ Setup

Consult Raspberry Pi Help to setup the Raspberry Pi. Use the Raspbian with Desktop download. It is sufficient to power the Raspberry Pi with a USB cable attached to a computer for setting it up, though expect to see low power warnings.
Once the Pi is running, install Franklin firmware on the Pi:
1. Open a terminal.
2. Create a new src folder: mkdir src
3. Move into folder: cd src
4. Clone the required repos:
  - Franklin: git clone https://github.com/mtu-most/franklin.git
  - python-fhs: git clone https://github.com/wijnen/python-fhs.git
  - python-network: git clone https://github.com/wijnen/python-network.git
  - python-websocketd: git clone https://github.com/wijnen/python-websocketd.git

Arduino Uno + CNC Shield

Stage

Retrieved from "http://wiki.mdot.mse.mtu.edu/index.php?title=C457_System_Assembly_Instructions&oldid=35"